Want to reduce wheel bite and improve your skateboard setup? VJ Rubber Riser Pads with Mounting Hardware offer a simple way to add height between your skateboard deck and trucks. This kit includes two rubber riser pads and eight mounting screws with nuts, making it a convenient upgrade for skateboarders and longboard riders.

Whether you ride a street skateboard, cruiser, longboard, or old-school deck, these rubber riser pads can help you fine-tune your setup. Plus, the shock-absorbing rubber construction helps cushion road vibration for a more comfortable ride.

Shop VJ Rubber Riser Pads with Mounting Hardware on Amazon

As an Amazon Associate, Shred District may earn from qualifying purchases.

Why Choose VJ Rubber Skateboard Riser Pads?

Riser pads sit between your skateboard’s deck and truck baseplates. By raising the trucks, they increase the space between the deck and wheels. As a result, the right riser pad thickness can help reduce wheel bite during sharp turns.

VJ rubber riser pads also provide a cushioning layer between the deck and trucks. Therefore, they’re worth considering if you want to adjust your skateboard’s height while helping absorb some road vibration.

Key Features and Benefits

• Helps reduce wheel bite: Raises your trucks to provide additional wheel clearance.
• Rubber shock absorption: Helps cushion road impact and vibration for a more comfortable ride.
• Broad compatibility: Designed for many skateboard, longboard, cruiser, and old-school setups using standard skateboard trucks.
• Three thickness options: Choose from 6mm, 12mm, or 14mm to suit your setup.
• Mounting hardware included: The package includes eight screws and matching nuts.
• Convenient upgrade kit: Get two riser pads and mounting hardware in one package.

What’s Included in the VJ Riser Pad Kit?

Each package includes the following components:

Item	Quantity
Rubber skateboard riser pads	2
Skateboard mounting screws	8
Matching mounting nuts	8

This kit gives you the riser pads and mounting hardware needed for a typical four-hole truck mounting pattern. However, check the selected product option to confirm the hardware length and included components before ordering.

Help Reduce Skateboard Wheel Bite

Wheel bite happens when a skateboard wheel contacts the underside of the deck during a turn or landing. This contact can abruptly slow the board and cause a rider to lose balance.

Fortunately, riser pads can help create more clearance between the wheels and deck. VJ rubber riser pads raise your trucks, which may reduce the chance of wheel bite.

However, the ideal thickness depends on your wheel diameter, truck geometry, deck shape, and riding style. If you use larger wheels or experience wheel bite during tight turns, consider whether a thicker riser pad suits your setup.

Rubber Riser Pads for Shock Absorption

Skateboarding on rough pavement can produce vibration through your wheels, trucks, and deck. Rubber riser pads add a cushioning layer between the truck baseplates and skateboard deck.

Consequently, these pads may help absorb some impact and vibration while riding. Although risers won’t eliminate road vibration, they offer another way to fine-tune your skateboard setup.

Choose the Right Riser Pad Thickness

VJ offers three thickness options, allowing you to choose the amount of additional height that best suits your skateboard.

Thickness	Best considered for
6mm	Riders who want a modest increase in truck height
12mm	Setups that need a more substantial height increase
14mm	Setups that require even more deck-to-wheel clearance

These are general selection guidelines rather than guaranteed fit recommendations. Before purchasing, check your wheel size, current truck height, deck shape, and hardware length.

View VJ Riser Pad Sizes and Availability on Amazon

Compatible with Skateboards, Longboards, and Cruisers

One benefit of skateboard riser pads is their versatility. VJ designed these pads for use with many standard skateboard truck setups.

You may want to consider them for:

• Street skateboards: Add clearance when your wheels come close to the deck.
• Longboards: Fine-tune truck height for your preferred setup.
• Cruisers: Help accommodate certain wheel and deck combinations.
• Old-school skateboards: Adjust the height of compatible traditional truck setups.

Before ordering, verify that the pad’s mounting-hole pattern matches your trucks. Also, check the product listing for the exact dimensions and compatibility details.

How to Install Skateboard Riser Pads

Installing riser pads is a straightforward skateboard maintenance task. Follow these basic steps:

1. Remove the trucks: Carefully loosen the mounting nuts and remove the existing hardware.
2. Position the riser pads: Place one pad between each truck baseplate and the deck.
3. Align the mounting holes: Make sure the pad and truck holes line up with the deck holes.
4. Install the hardware: Use appropriately sized mounting screws and nuts.
5. Tighten and inspect: Secure the trucks evenly, then check that everything sits flush and firmly in place.

After installation, test your skateboard at low speed. Check wheel clearance during turns, and make sure the hardware doesn’t protrude excessively or interfere with your setup.

Are VJ Rubber Riser Pads Worth It?

VJ rubber riser pads are worth considering if you need additional wheel clearance, want a cushioning layer between your trucks and deck, or need mounting hardware for your setup.

The three available thicknesses also make it easier to choose a height adjustment that suits your board. Nevertheless, you should match the thickness and hardware length to your specific trucks, deck, and wheels.

If you’re upgrading more than just your risers, explore our CCS skateboard trucks guide to learn more about skateboard truck sizing and choosing compatible components.

Frequently Asked Questions

Do skateboard riser pads help prevent wheel bite?

Riser pads raise the trucks and create more clearance between the deck and wheels. Therefore, they can help reduce wheel bite. However, the result depends on wheel size, truck geometry, deck shape, and turning angle.

What thickness of riser pads should I choose?

VJ offers 6mm, 12mm, and 14mm options. Choose based on your required clearance and existing setup. If you’re unsure, compare your wheel diameter and truck height before ordering.

Do these riser pads include mounting hardware?

Yes. The listed package includes two rubber riser pads, eight mounting screws, and eight matching nuts. Check the selected option for the exact hardware specifications.

Can I use these riser pads on a longboard?

They’re designed for many skateboard and longboard setups that use compatible standard truck mounting patterns. Confirm the pad dimensions and hole pattern before purchasing.

Will rubber riser pads make my skateboard ride smoother?

The rubber material helps cushion some impact and vibration between the deck and trucks. However, your wheels, bearings, deck, and riding surface also affect ride comfort.

Upgrade Your Setup with Shred District

Improve your skateboard setup with VJ Rubber Riser Pads with Mounting Hardware. These pads help increase wheel clearance, cushion some road vibration, and provide a convenient mounting kit for compatible skateboards and longboards.

Choose from 6mm, 12mm, or 14mm thickness options to suit your needs. Then, complete your setup with properly matched trucks, wheels, and hardware.

Check the latest price and choose your VJ Riser Pads on Amazon

Explore more skateboard accessories and setup guides at Shred District — Find Your Line. Own Your Ride.

Affiliate disclosure: This post contains an Amazon affiliate link. Shred District may earn a commission from qualifying purchases at no additional cost to you.